Difference between revisions of "Capturing invoice data"

Revision as of 15:51, 6 October 2016

There are a few possibilities to capture the invoice images:

• Via file upload (available from 1Archive version 2.4.119)
• Via mail
• Via webscanning

1 Capturing paper invoices by webscanning

Invoice images are loaded into the system upon arrival through paper webscanning or file import.
The process of webscanning contains following steps:

1. Batch preparation
2. Batch creation
3. Capturing the images by scanning
4. Validation of the separation
5. Release to the recognition server

1.1 Batch preparation for paper invoices

Before scanning the invoices, the scan batches have to be prepared. Take account of following:

• Remove all the staples of the invoices
• No stamps or post-it on the invoices
• Eliminate publicity

Invoices can be separated by putting a separator sheet between each invoice or by indicating the number of pages per stack of invoices.

• The separator sheets can be printed. You can read something more on how to do that here.
• The page indicator (to split your documents after a number of pages) can be found in the scanning application.

Different stacks can be made, depending on the batch fields.

You always have to divide the invoices depending upon the journal.

Best practices for batch creation:

• Separate multiple pages and single pages.
  • Scan multiple invoice pages with a separator sheet.
  • Scan single page invoices using the "page indicator".
• Divide invoices depending on journal.
• Keep invoices and credit notes separated.
• Stack invoices of the same period together.
• Restrict your batches to approximately 20-30 documents.

1.1.1 Screen layout

On the right side of the screen, right below the company selection field, you’ll find the "Actions" menu. Here you can create a batch or print the separation sheet.

The main screen shows a list of different batches available to you. These are available based on:

• the user who is logged in.
• the company which is selected.
• availability (you haven't processed them yet).

The list shows you following details of the batches:

• Batch name: default value is the date of today and the current time.
  • In case of a mailbatch, default name is "MAIL - date of today and current time".
• Creation date: the date and time on which the batch has been created.
• Company: the company for which you are scanning.
• Batch type: the type of document provided.
  • Incoming invoices
  • Outgoing invoices

In case the batch is a mailbatch, the type will be Incoming invoices by default.

This can be changed by editing the batch via the "Edit" button

• Reception method: the method for receiving the documents. Possible values:
  • Webscanning
  • Mail
  • Manual creation
  • XML
• Status: the possible statuses your batch can have.
  • New: the batch has just been created.
  • Scanning: the scanning application is running.
  • Received: the server received the scan batch.
  • Ready for transformation: the batch is ready to be processed by the OCR server.
  • Transformation: the batch is being processed by the OCR server (recognition).
  • Import error: an error occurred while importing the batch into the OCR server.
  • Transformation error: something went wrong during the OCR recognition.
  • Finished: the batch is not visible anymore, documents are ready to be validated in 1Archive

In case of import or transformation error, please contact our helpdesk.

To the left of the “Actions” menu you can find information on how many scan batch pages are available in the list.

Use following icons to move around:

• "First page": go to the first page of the list.
• "Previous page": go to the previous page of the list.
• "Last page": go to the last page of the list.
• "Next page": go to the next page of the list.
• "Reload": is used for refreshing the list.

You can’t continue working with a batch with scanned documents on another computer. Images are locally stored on the computer before sending the batch to the server. So you have to finish your batch on the same computer.

1.2 Print separation sheet

To print the separator sheet choose Actions then Separator sheet.


A pdf will appear with the separation sheet. You can print or save it.

1.3 Batch creation

Make sure you are working in the company for which you want to scan the invoices. For more info on selecting a company, click here.

To create a scan batch click on the right side right on Actions then Add scanning batch.

• Select the batch type (Incoming invoices / Outgoing invoices).
• You can define a batch name, the default value is the current date and time.
• Fill in the batch fields, these fields will contain suggested data based on the default values (which are defined in the settings).
  • Fields available for all environments:
    • Invoice type
    • Journal
  • Fields available for EIS and OIS
    • Period
  • Fields available for VIS
    • Bookyear
    • Directly to finish

All fields (with exception of "Directly to finish" will have a proposed value. If you would like to change that value, click the "Lookup list" button to browse the different available options. It's also possible to start typing a value. In that case, a list with possible values will appear.

Click the save button to create the batch and click on "Scan", located in front of your scan batch, to open the scan application.
You can use "Edit scanning batch" to edit the batch fields or "Remove scanning batch" to delete the batch.

1.4 Capturing the images by scanning

Put your papers on the scanner and click on "Scan" to start scanning.

Following screen will pop up.

All installed scanners will be displayed in this popup screen. If you have a VRS scanner, it is advised to use this device. This is because it's guaranteed to have better scanning results

Below the scanner selection list, you have the possibility to check the box for "Recto verso". This option allows you to scan both sides of a document.

Blank pages are deleted when scanning with VRS or when the scan setting "Blank page detection" is enabled.

At the bottom of the pop up screen, you can define which settings for separation you would like to use. You have 3 different options to choose from:

• Default: barcode recognition or separator sheet detection is performed during the scanning process.
• Split each x pages: select the number of pages after which you would like to split the document.

When scanning one recto verso document, you will have two documents if this setting is set to Split each 1 pages.

Scanning with the setting "Blank page detection" enabled": blank pages are deleted during separation. So if you have a batch of all single documents with a blank page on the rear side, you have to put the split number to two.

• Ignore separation: choose this option if you don't want to separate.

This option will be the fastest, because no barcode recognition or separator sheet detection is executed.

It is advised to use the "Blank page detection" for webscanning.

Separation is done without taking into account the blank pages. So if you have a batch of all single documents with a blank page on the rear side, you have to put the split number to one.
If all pages are scanned, you will receive a pop up with the message "Out of paper". If you want to continue with scanning, put more papers on the scanner and the scanning will continue automatically. If you want to stop, click "Cancel".

Repeat the scan steps if you want to scan more pages.

1.5 Edit the webscanning settings

You can change the settings of the webscanning by clicking the "Web scanning settings" button inside the webscanning application.

Has to be enabled when you are working with a proxy server. Contact your system administrator for the proxy server details.

Enable if you want to delete blank pages. You have the possibility to determine the intensity of the blank page detection.

Enabled by default. Ensures that the image you are scanning gets optimized.

Page size: A3, A4 or A5.
Page orientation: portrait or landscape.

Enable if you want to log what happens during the webscanning.

Fill in the path to a log file on your hard drive in the text field that becomes editable when enabling this.

2 Capturing the images by file import

The webscanning application also has the possibility to import images via file import:

1. Click "Add from file" to import PDF/TIFF/JPEG files.
2. In the window that appears, select the files you would like to import.
   • If you want to select multiple files, use the "Ctrl" button.
3. Blank pages are deleted if configured in the settings.
4. In file import, you can work also with separator sheets in order to do separation.
5. If you want to automatically split the imported file(s) in multiple documents, you can select Split on import and define the number of pages.
6. I you want to move the imported image to a Done folder, select Move to "done" folder when imported (a Done folder will be created in the import folder).

When importing files, be aware of following file conditions: Grayscale No photo 300 dpi No secured PDF

3 Separation validation

After scanning you will see in the left pane an overview of all the scanned documents with their different pages (thumbnails). In the right pane you will see the image of the selected page.
Following actions can be performed on the scanned pages:

• Put pages into a new document by clicking "Add a new document".
• Split a document by clicking "Split the selected document", a new document will be created from this page on.
• Click "Remove selection" to delete the selected document or page.
• Click "Rotate selected images left" or "Rotate selected images right" to rotate the images.
• Click "Save and close" to save the scan batch without sending to the OCR server.
• Click "Zoom factor" to scale the thumbnails.
• You can drag and drop the selected pages in a document or to another document.

4 Release to recognition server

Click on "Save Send" to save the batch and send it to the OCR server.

5 File upload

When selecting a company, you have an extra connector available:

This feature allows you to upload files directly from your computer. When clicking it, a pop-up screen appears:



This screen allows you to define several fields for the upload of your file(s). Available fields:

• Batch type: define the type of your file(s). Possible values are:
  • Incoming invoices - this will be the default value.
  • Outgoing invoices
• Company: choose the company for which you would like to upload the file(s). Default value will be the company you selected.
• Batch name: define the name your scanning batch should have. Default value will be the current date and time.
• Fields:
  • Invoice type: choose the type of the file(s) you are uploading. Possible values:
    • Invoice (F)
    • Credit note (C)
  • Journal: choose the journal for which the document(s) should be created. Default value will be the default defined in the settings.
  • Period: choose the period for which the document(s) should be created. Default value will be the default defined in the settings.
• Dropzone: drop the file(s) you need to upload here. This can be done by drag and drop. Just select the file(s) you would like to upload on your computer and drop them in the dropzone.

When clicking "Save", a batch will be created and after all the processing steps are executed, the files will automatically appear in your archive. No extra steps need to be taken.

6 Mail

You need to have a 1Archive mailbox in order to use the mail possibility

If you would like to request a mailbox, please contact us via support@onea.be

First of all, you send an e-mail to your 1Archive inbox. This e-mail has to contain the document(s) you want to add as attachments. The "Mail download" job ensures that your e-mails will be imported into 1Archive. Choose "Incoming mail" as document type in the "Archive" screen.


A new line in the list has been created. This line contains some info about your e-mail.

• Id: the ID of the document in 1Archive.
• Status: the status in which the e-mail is.

If the status is "Finished", a batch has been created.

• From: the mail address from which the mail was sent.
• To: the mail address to which the mail was sent.
• CC: the mail addresses to which the mail was sent as carbon copy.
• BCC: the mail addresses to which the mail was sent as blind carbon copy.
• Received date: the date on which the mail was received.
• Subject: the subject of the mail.
• Body: the body of the mail.

The document can be viewed via the "View the document" button.
After the mail has been processed (and the status of your incoming mail is "Finished"), a mail scanning batch has been created.

The process of downloading mails into 1Archive runs every 5 minutes, so it could happen your batch does not appear right away.

This batch can be viewed in the "Document loader" and can be processed the same way as a normal scanning batch.

See "Capturing the images by scanning" for more info.

7 E-invoicing